Technical, Techniques, Hints, and Tips > Modelling tools
Best tools for cutting slots in plywood
dillinger 04:
Hello Everyone
I am looking for the best tools for cutting roughly 4mm wide by 15 mm long rectangular slots in 4mm birch plywood for a prop shaft opening.
small hobby saws designed of cutting plywood? or other tools that might do the job . Any help would be appreciated
Footski:
I would drill a hole in one corner and then use a small saw blade to make the cuts..filing down the edges once the hole is cut.
SteamboatPhil:
Urm have you got that right, a 4 mm slot in 4mm material.... :o
6705russell:
I think he means 4mm thick plywood Phil not 4mm wide.. :embarrassed:
Mark T:
--- Quote from: Footski on December 11, 2021, 05:21:41 pm ---I would drill a hole in one corner and then use a small saw blade to make the cuts..filing down the edges once the hole is cut.
--- End quote ---
Great advice - this is what I would do
Navigation
[0] Message Index
[#] Next page
Go to full version