Good Evening All
Has anyone wired up the graunper nordic tug as it comes from graunper ( the tug has two motors , one motor has a red wire from one motor spliced with a black wire from the second motor the second motor has a black wire spliced together with the red wire from the first motor how could i run both motors from one supply or would l i be better running each motor from a separate supply i intend to have separate esc for each motor
Spoke to my local model shop who seem to lean towards the separate motor supply because if one prop gets fouled you may have the other prop to get the model back to shore
Would welcome any advise
Regards
H W Spary (midships}