Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[tica]

Well got sidetracked with a bit of a different type of boat 
I found a youtube video of a 1/10 RC BRDM-2 amphibious vehicle, and of course I had to by the files for that. (Seller has de-activated his account on cults3d at the moment).

For size, the Pepsi can is a std. 330ml can.
Length: 575mm Width: 234mm and will weigh approx. 4Kg
More pictures to follow.

[tica]

A lot of printing and one got at lot of parts.It can either be with rocket launchers or as a reconnaissance with a gun turret.
When I bought the files it came with a gearbox that were making a lot of noise, but there came upgrade using belts and that will be the setup for this build.
I used Plastic Magic from Deluxe as glue, and it works great on PLA Strong.

All joints is strengthened with fine FG strips and resin.

[tica]

And some more progress, the missile launchers.

[tica]

And the gun turret.

[tica]

Engin hatch, half of it can be lifted up.

[tica]

Wheels, Belt gearbox and axels.
All orange parts is PC Blend.Tires is printed in TPUGearbox is printed in PETG

[tica]

And here I made a "small" mistake when printing the main axel, I had the slicer set up to align seem  so there were a nice low line (0.2-0.3) though the length of it causing water to easily flow though. Well fixed with a new print where it were set to random.

[tica]

Front cabin ready for assembly and the hull has been reinforced with fine FG cloth.
And the servos for the support wheels has ben installed.

[Sonar]

This would make a great kit for someone that does not have a 3D printer.


As the  visual instructions are on your great thread ..