Topic: MAKARA CLUB (Read 276298 times)

2772e · « **Reply #200 on:** January 26, 2008, 09:30:03 pm »

Hey Danny,

It was a bit wild at times, the orange one has all the weight at the back and Bill was off a wave. Good for the camera though.

1/4 should be fine, just crap flexi's. Have to speak to mr Copley!

Only joking by the way, trust you will standing next to me this year? I can pit for you?

Regards

Simon

Bill D203 · « **Reply #201 on:** January 27, 2008, 01:01:06 pm »

Thats what you get when you try to get to close to the bouy. Still a repair job should get it back in the water very soon.

:)

2772e · « **Reply #202 on:** January 30, 2008, 08:03:20 pm »

AL, Pete, Blagmeister where are you and whats happening with your boats?

Bill D203 · « **Reply #203 on:** January 30, 2008, 09:28:58 pm »

Looks like they have gone to ground Simon. Gas coures went real good. got done a day early.

2772e · « **Reply #204 on:** January 30, 2008, 09:33:52 pm »

I assume you passed then?

Bill D203 · « **Reply #205 on:** January 30, 2008, 09:42:18 pm »

O yes. it was very stiff but the staff were vey helpfull , there are set time to do the 3 papers but they didnt seem to mind how long it took you to complet. Still now I can get on with my Endforcer rebuild.

2772e · « **Reply #206 on:** January 30, 2008, 09:49:43 pm »

Damon will be pleased!

Bill D203 · « **Reply #207 on:** January 30, 2008, 10:02:19 pm »

Yes I bet he will be

Bill D203 · « **Reply #208 on:** January 31, 2008, 04:42:58 pm »

Simon :)
Im in at RED Bull F! in the morn see if i can get your paint code you want. Had a day in the shed, The hole is all done now, Just need to find some paint which matches. Still she should be dryed out in time for a run out on Sunday.
Bill

2772e · « **Reply #209 on:** January 31, 2008, 08:03:25 pm »

pics please?

Bill D203 · « **Reply #210 on:** February 03, 2008, 12:04:57 pm »

Been out testing this morn. Damon. The hole is all repaired and seems to be water tight. My Makara is now off the water for a few weeks till the club engineer makes me up some parts for my Exault pipe

Bill D203 · « **Reply #211 on:** February 05, 2008, 08:17:26 pm »

Hello
Here's one for all you Zen owners. I need to get new spark plugs for both of my boats. What do you all use??? I have a resitor type plug fitted which makes it a pig to start NGK CMR5H. Any info would be helpfull.
Ta very much
Bill.

AC RAZOR 45 · « **Reply #212 on:** February 11, 2008, 08:34:56 pm »

HI EVERY ONE NOT BEEN TO WELL OF LATE SO SORRY FOR THE ABSENSE, HOWS EVERY ONES MAKARAS, AND ARE YOU ALL READY FOR A GREAT DAYS RACING IN JUNE.MAD

..AL

Bill D203 · « **Reply #213 on:** February 11, 2008, 09:12:28 pm »

Hi Al
Sorry to here you have not been well.
We are all still here. doing some final finshing bit to my boat. Should be good for the OMRA session.

Bill D203 · « **Reply #214 on:** February 11, 2008, 09:19:01 pm »

Did a Date ever get set for the Mad Makara man day out????????? ::) ::) ::) ::)

AC RAZOR 45 · « **Reply #215 on:** February 11, 2008, 09:28:25 pm »

HI BILL MARK FROM TRAFFORD IS GOING TO HAVE A WORD WITH KINGSBURY FOR A DATE IN JUNE ALL BEING WELL...MAD

AL

Bill D203 · « **Reply #216 on:** February 11, 2008, 09:31:14 pm »

Good Stuff. Sooner the date is set the better as I do tend to be busy during that time.

AC RAZOR 45 · « **Reply #217 on:** February 11, 2008, 09:33:14 pm »

HI BILL ITS ABIT LATE NOW TO PHONE MARK BUT ILL EMAIL HIM A GEE HIM UP...HOW THE BOAT NOW BILL WITH THE MODS YOU'VE DONE IS SHE RUNNING QUICKER...MAD

AL

Bill D203 · « **Reply #218 on:** February 11, 2008, 10:02:51 pm »

Still waiting to get the bits back from the club engineer. Should get them next Sunday. The modes are on the EX pipe. I am having an extention block made to go between the header and the head so it lines up better & a Collier to stop the tail pipe cutting into the boat.
None of which will make it go faster but hopfully last longer. Shorted out my RX probs by replacing the unit with a Sanwa rx which works just fine. Had A brill day with Simon and other last Saturday. I only had my old Endforcer to run but I got 3 liters of fuel through it with only driver errors to stop play. Lets hope the Makara dose the same in a few weeks time. At the mo the head- carb- ex pipe are all being worked on. PS got the 257 carb on which did liven things up a bit.

AC RAZOR 45 · « **Reply #219 on:** February 11, 2008, 11:10:57 pm »

yes they are a good carb the 257 especially if its ported,still nice to here its coming along,should be a good boat when your done....mad

al

Stavros · « **Reply #220 on:** February 12, 2008, 05:40:49 pm »

A friendly word from your moderator behave or me will get

that is all I will say for now!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Stavros

2772e · « **Reply #221 on:** February 12, 2008, 07:20:34 pm »

So did we miss something? :(

bigtee · « **Reply #222 on:** February 12, 2008, 08:14:10 pm »

stavros

whats up , bill and i went testing with the essex gang of our own free will no one pointing sharp things at us ???

had a grand day and i even got simons engine sorted .............. no problems here ,,,,,,,,, was it ok for you bill ??

tony

Bill D203 · « **Reply #223 on:** February 12, 2008, 08:16:58 pm »

One of the best days boating this year. Good company , Brill sunshine, Good water, What more can a boater ask for?

AC RAZOR 45 · « **Reply #224 on:** February 12, 2008, 08:27:34 pm »

sent an email to mark at trafford regarding m.m day out in june so see what he comes up wit date wise...mad

al

News:

Author Topic: MAKARA CLUB (Read 276298 times)

AC RAZOR 45

AC RAZOR 45

AC RAZOR 45

AC RAZOR 45

Stavros

bigtee

AC RAZOR 45