Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: connections  (Read 1041 times)


  • Guest
« on: March 05, 2008, 01:19:40 pm »

i want to put some running lights on a Dickie tug ive been messing about with. My problem is i know i cant set them up like a xmas tree set so is there a connector, or strip  i can buy or can i solder each set of wires i.e pos and neg to their respective types   with a single wire off each going to the   battery with a switch breaking the pos feed so i can use them at will.
Botchit :-\


  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 2,096
  • Location: Thaxted, Essex
Re: connections
« Reply #1 on: March 05, 2008, 02:08:26 pm »


You can buy connector strips in Maplins etc. They are plastic with brass inserts with two screw clamps per position. Using these you can connect them as in the (very) rough diagram attached. If the bulbs are not the same voltage a the battery, then you need to wire them in series or parallel to match the battery.



  • Guest
Re: connections
« Reply #2 on: March 05, 2008, 02:26:09 pm »

Thanks Barrie sound answer easy to follow Cheers O0 O0
Pages: [1]   Go Up