Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Well deck ramp  (Read 3004 times)

hover tim

  • Guest
Well deck ramp
« on: July 05, 2008, 09:08:48 pm »
on the current hovercraft i somehow need to make the well deck ramp go upand down but i not sure how to go about doing tihs as dicrestly as possible anyone done this sort of thig before follow link for pics http://www.flickr.com/photos/19759955@N07/2640162202/   http://www.flickr.com/photos/19759955@N07/2639335303/in/photostream/
Logged

cos918

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 2,287
  • Location: Abingdon
Re: Well deck ramp
« Reply #1 on: July 06, 2008, 10:08:05 pm »
hi tim. i have done this on my car ferry celestine. What you need are 2 snakes. These are used by the rc fly boys to control rudders etc. The if its a ram you are after get down your local model shop get some aluminum tube the a brass tube that the ally tube can slide up. get the inside of the snake and gule it inside the ally tube. get the out side of the snake and gule to the brass. depending on how much force is required you could use a servo. i dad to use a linneaur actuator.
 I have put a few photo as a pitcher speaks a 1000 words so here 4000
john
Logged

Umi_Ryuzuki

  • Guest
Re: Well deck ramp
« Reply #2 on: July 06, 2008, 10:24:04 pm »
You can hide the servo in the pilot house.
It doesn't have to be close to the ramp.  8)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.104 seconds with 21 queries.