Topic: ATLAS 5-Ton Hydraulic Crane (Read 22411 times)

grzegorz75 · « **on:** August 22, 2008, 12:13:51 am »

Hello . :)

ATLAS 5-Ton Hydraulic Crane from Model Slipway.
White metal rings are not glue to crane's body now.

portside II · « **Reply #1 on:** August 22, 2008, 01:05:42 am »

This is a loverly kit ,and a joy to build .i built one for the greamsey kit as the one supplied was a bit fiddly for me (got big hands) . I also decided that my tug brakengarth should have one ,so i scaled up the plans and built this .

daz

tugs46 · « **Reply #2 on:** August 22, 2008, 02:14:19 am »

Looks awsome, as does your tug

Thought I was looking at the real thing there!

6705russell · « **Reply #3 on:** August 22, 2008, 12:22:16 pm »

Yes i built one to put on the back off my tug, cracking little kit to make.

Russ

ronkh · « **Reply #4 on:** August 22, 2008, 03:52:17 pm »

Lovely tug and crane. Can you give some sizes please?

Ron.

6705russell · « **Reply #5 on:** August 22, 2008, 08:10:02 pm »

Hi Ron,

The tug measures 1200mm x 450mm at widest point, the crane is 1/32 scale, ideally i needed to scratch build one slightly bigger, this i will do in time.

ronkh · « **Reply #6 on:** August 22, 2008, 08:52:14 pm »

Cheers Russell,

Gets better each shot. Now of to beddies as up early tomorrow for week down Dorset.

Ron.

grzegorz75 · « **Reply #7 on:** August 22, 2008, 10:59:18 pm »

grzegorz75 · « **Reply #8 on:** August 23, 2008, 11:27:10 pm »

Hello :)

grzegorz75 · « **Reply #9 on:** August 24, 2008, 08:57:51 pm »

grzegorz75 · « **Reply #10 on:** September 01, 2008, 09:04:08 pm »

Hello

grzegorz75 · « **Reply #11 on:** September 07, 2008, 08:52:52 pm »

Hello :) :) :)

grzegorz75 · « **Reply #12 on:** September 14, 2008, 08:03:54 pm »

Hello ::)

hama · « **Reply #13 on:** September 14, 2008, 11:02:10 pm »

Oh boy!

grzegorz75 · « **Reply #14 on:** September 17, 2008, 09:22:19 pm »

Finish :)

catengineman · « **Reply #15 on:** September 17, 2008, 11:39:28 pm »

Well done there so when are you going into production ?

there be a few vessels out there wanting some great looking crane on its decks

R,

grzegorz75 · « **Reply #16 on:** September 18, 2008, 07:39:56 pm »

Thank you :). I have corrected hydraulic pistons.

grzegorz75 · « **Reply #17 on:** September 19, 2008, 08:03:31 pm »

Martin (Admin) · « **Reply #18 on:** May 20, 2009, 01:07:22 pm »

My mate Pete's Atlas Crane.
He'll build you one if you ask nicely.... and cross his palm with silver.

dougal99 · « **Reply #19 on:** May 20, 2009, 04:45:48 pm »

Nice work Pete. Be sure you get it back from Martin

Martin (Admin) · « **Reply #20 on:** November 25, 2009, 07:47:45 pm »

Pete has built another crane.

Hiab Seacrane 61

portside II · « **Reply #21 on:** February 16, 2010, 03:08:15 pm »

Oooh

that a real nice piece of work ,now where did i leave that patience

.
daz

rathikrishna · « **Reply #22 on:** November 23, 2010, 09:53:03 am »

Sir will it work itself..means controlled by R/C..?

Martin (Admin) · « **Reply #23 on:** November 23, 2010, 06:29:33 pm »

Not this one......

But this one does!

http://www.modelboatmayhem.co.uk/forum/index.php?topic=23125.msg268491#msg268491

rathikrishna · « **Reply #24 on:** November 24, 2010, 07:47:19 am »

Sir, its a amazing piece of work..and sure a engineering marvel..and 18 channels...WOOW....and one more request..your craft is too fascinating me..and from now i am willing to build one in to my collection, so may i save some photographs from you..? not for any bussines intention, but only for my personal refference and collection, will you allow me..with great hope and great respect..Rathikrishna

News:

Author Topic: ATLAS 5-Ton Hydraulic Crane (Read 22411 times)

grzegorz75

tugs46

ronkh

ronkh

grzegorz75

grzegorz75

grzegorz75

grzegorz75

grzegorz75

grzegorz75

hama

grzegorz75

catengineman

grzegorz75

grzegorz75

rathikrishna

rathikrishna