Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[rats]

Can anyone recommend a good powerful bow thruster suitable for a 46 inch tug ?  I have never used one before but all the reviews I have read of models that have them fitted generally seem to express dissatisfaction with the output. If not any idea how to make one - the design must be easy enough just a matter of sealing the tube from boat !

   thanks in advance  rats

[Scottie]

I've used the Graupner one in my 53" ro/ro ferry, it's a bit noisy but pushes her around well enough.
I've bought a Robbe one for the 7 1/2 foot container ship I'm building, Mark at AMW said it was more powerful than the Graupner but I can't confirm that yet.

Hope this helps,

Scottie

[rats]

 Thanks for reply Scottie,  as I understand it Robbe do two bow thrusters one of which is a twin screw but they are using plastic props can you confirm that ?
  cheers rats

[Scottie]

Hi Rats,

Sorry, I can't confirm. The one I have is a 'paddle' type, not propellor type.

Scottie.

[Tug-Kenny RIP]

I also have the Robbe 'Paddle' type, but have not tried it yet.

Just a note to remember that they have short tubes and need to be fitted closer to the bow. I did not want to do this, so I made longer tubes. It will be a while before I can try it out though.
Hope this helps


Cheers...Ken

[17-21]

I fitted the robbe one in my Lifeboat it was no good, this maybe due to the lifeboats size so I got a new one from the Model dock yard part Number M75112 its not cheap but it works well, and has two props just like the real ones.

As far as i know Robbe are no longer making the prop type bow thruster.



17-21

Phil.

[portside II]

 ;DHi there i have the robbie prop type thruster in brakengarth and at 42" ,half a ton (it feel's like that) it pushes her around great now that i have fitteda decent motor in .
the onlt prob is the noise ,but if you can put up with that fine.
I also have the new paddle type fitted in metcalf mouldings Greamsey but dont know what its like as it's not been wet yet.
hope this helps
Daz

[rats]

  thanks for all replies the Marx Luder from Model Dockyard looks impressive - cheers 17-21
                  rats

[ministeve]

hi rats if u useing tug for towing u might like to fit one of these ive made plenty for the lads in our club at ellsmearport if u need details on how to build one just ask they will dock a 14 foot ship with ease

[rats]

 Thanks ministeve have sent you PM
         rats

[ministeve]

hi rats i seem to be haveing probs seeing pm try just emailing me on " [email protected] "

[rp6705]

Have you tried a couple of wiper/washer motors, i used two in my Norderney and they are very powerful and a lot cheaper than Robbe/Graupner.

[Subculture]

You can use centrifugal pumps, they really shift water.

You will need two as they're not reversible, but they're only about £12 each, so still cheaper than the Graupner thrusters.

http://www.leisureshopdirect.com/caravan/water/reich_pumps.aspx