Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Old Futaba M series R/C  (Read 7368 times)

ian kennedy

  • Guest
Old Futaba M series R/C
« on: July 08, 2011, 04:56:54 pm »
Hi,

It may be a long shot but could anyone help me find a supplier of the old style male triple exposed pin conector leads for the old M series Ripmax Futaba radio sets.

Also does anyone know where i could get an old reciever repaired/serviced? Does model avionics still trade and repair equipment, if so do any of you helpful people have up to date contact details for them.

Thanks in advance


Ian
Logged

JayDee

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 957
  • Model Boat Mayhem is the VERY Best !
  • Location: Warrington Cheshire.
    • JOHN DOWD
Re: Old Futaba M series R/C
« Reply #1 on: July 08, 2011, 05:28:46 pm »

Hello Ian,

I have 5 of the angled type and one of the straight type, all brand new and yours if you want them.
The wires are about 6 inches long on all of them.

John.  :-))
Logged
My Projects, Photos and Videos
http://www.john-dowd.

ACTion

  • Guest
Re: Old Futaba M series R/C
« Reply #2 on: July 08, 2011, 06:42:09 pm »
Ian
Model Avionics ceased to trade about 20 years ago. All Futaba servicing is now done c/o Ripmax.
Dave M
Logged

ian kennedy

  • Guest
Re: Old Futaba M series R/C
« Reply #3 on: July 09, 2011, 11:00:33 pm »
Thanks,

John and Dave  :-))

A question for Action man Dave, Do you think Ripmax would still offer a repair service for such old equipment these days? Or in your experience and and numerous conections know of any one else who may be able to help?

I think the problem lies with the conector pin blocks on two of the three 27 Mhz FM recievers i have, it may be dust contamination in the pin hole causing a bad connection. All three worked perfectly for many years, but I have just recently dug them out of storage to have a play.


Thanks  :-))


Ian
Logged

roycv

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,529
  • Location: S.W. Herts
Re: Old Futaba M series R/C
« Reply #4 on: July 09, 2011, 11:28:34 pm »
Hi, I found the 6 ch. rx a bit of a problem and Model Avionics serviced it but it never really was reliable,  I suppose the dust cores don't stand the test of time? I have the circuit diagram of the rx as well.

BUT I currently use the transmitter a thing of beauty with a couple of Micron 27 M. FM rx's for which I have replaced the servo block and it now runs modern connectors.  27 FM crystals are a bit difficult but I have 3 sets and I rely on them.

I do have some old Futaba servos with the old type connector if you are interested.
regards Roy
Logged

ian kennedy

  • Guest
Re: Old Futaba M series R/C
« Reply #5 on: July 10, 2011, 10:44:13 am »
Hi Roy,

I agree with you on the TX styling, this is the reason why i wish to use this solid built old bit of kit.
IT was even a consideration stripping the gubbins out of one my Futaba T6EXA 40 Mhz sets and installing them into the two 6 M tranny cases i have.

The new era or radio control equipment is superb for reliability, But who ever designs the transmitters needs to go to spec savers......far to much plastic and light weight feel to them

I would love to addopt your old style servos and give them a new home......any idea how much you would like for them?


Regards

Ian
Logged

roycv

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,529
  • Location: S.W. Herts
Re: Old Futaba M series R/C
« Reply #6 on: July 10, 2011, 04:56:35 pm »
Hi Ian you have a PM.
Roy
Logged

rob

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 435
  • Location: somerset
Re: Old Futaba M series R/C
« Reply #7 on: July 10, 2011, 09:33:55 pm »
Ive got an old M series Rx that io have had since i was rather younger than i am now .
Would you like to rehome it ?
Logged
in my own little world

ian kennedy

  • Guest
Re: Old Futaba M series R/C
« Reply #8 on: July 10, 2011, 10:19:38 pm »
Hi Rob,

I would, but only if it is a 27MHz FM M series version %)

Thanks to all the lads who have P.M d me with info and help by the way :-))

Regards


Ian
Logged

roycv

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,529
  • Location: S.W. Herts
Re: Old Futaba M series R/C
« Reply #9 on: July 11, 2011, 10:45:45 am »
Hi Ian, parcel in the post to you as of 10:30 today.
In a white jiffy wrapper.
regards Roy
Logged

ian kennedy

  • Guest
Re: Old Futaba M series R/C
« Reply #10 on: July 11, 2011, 01:49:04 pm »
Hi Roy,

White 1st class recorded delivery envelope on it's way to you at 9.10am today :-))

Many thanks mate.


Ian
Logged

roycv

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,529
  • Location: S.W. Herts
Re: Old Futaba M series R/C
« Reply #11 on: July 13, 2011, 05:04:18 pm »
Hi Ian post arrived today, thanks very much, hope you have your parcel soon.
regards Roy
Logged

ian kennedy

  • Guest
Re: Old Futaba M series R/C
« Reply #12 on: July 13, 2011, 08:45:32 pm »
Hi Roy,

The parcel came this morning, thanks very much :}

All works very well, I have also managed to find a supplier of the the old Futaba G style cable and plug leads after what seems like weeks of trawling the net!


Regards

Ian
Logged

roycv

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,529
  • Location: S.W. Herts
Re: Old Futaba M series R/C
« Reply #13 on: July 14, 2011, 09:01:00 am »
Hi Ian, glad all arrived OK.  I have an AM M series ("2 x 6 ch.Tx's) that I was going to rebuild but decided that I really don't have the time.
I used to build my own, last one was an FM 27 Meg Micron set, that was a great set although the Tx now has a small fault.  Fortunately the rx's are fine.
It is nice to just fit and forget.
regards Roy
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.032 seconds with 21 queries.