Topic: Build midget japanese submarine type Koryu (Read 11179 times)

gantu · « **on:** April 04, 2007, 11:55:25 pm »

Hi

yesterday I visited Stefan at his submarine shipyard

. He had a very good idea with the technique rack so he cnc milled suitable frames it me. He has very much experience in submodelbuilding, he arrange it simply and straightforward avowedly without it so complicated it.

Here the first pic´s

Gantu

gantu · « **Reply #1 on:** April 04, 2007, 11:56:29 pm »

Here some more work on her, i did a mount for the esc direct behind the motor so i save space in the tech rack.

Gantu

gantu · « **Reply #2 on:** April 04, 2007, 11:57:07 pm »

so i also glued the ruders together

Gantu

gantu · « **Reply #3 on:** April 04, 2007, 11:57:48 pm »

The servomount i did also

Gantu

gantu · « **Reply #4 on:** April 04, 2007, 11:58:09 pm »

And i did some work on the lockring

Gantu

gantu · « **Reply #5 on:** April 04, 2007, 11:58:59 pm »

So i did some more work on the ruders

Gantu

gantu · « **Reply #6 on:** April 05, 2007, 12:00:04 am »

Here some pic´s of the piston tank see below. I am not sure if i build in a guide tube for the rudder axle
The rudder axle are in 3 mm brass and the guide tube inner diameter 3.1 mm and outer diameter 4 mm. But the the connection
of the two rudders i have to see how

Gantu

gantu · « **Reply #7 on:** April 05, 2007, 12:01:31 am »

Did some more work on the rudder

Gantu

gantu · « **Reply #8 on:** April 05, 2007, 12:01:55 am »

And more work on the rudders

Gantu

gantu · « **Reply #9 on:** April 05, 2007, 12:02:29 am »

And some more work on the rudders

Gantu

gantu · « **Reply #10 on:** April 05, 2007, 12:03:14 am »

So the siderudder nearly ready but the depthrudders comes soon

Gantu

gantu · « **Reply #11 on:** April 05, 2007, 12:03:35 am »

I did the rudder steering new is much better

Gantu

gantu · « **Reply #12 on:** April 05, 2007, 12:04:30 am »

Here some more work the depthrudder nearly ready and i glued the forrudder into the stern. Have to fill inside with Epoxi.

Gantu

gantu · « **Reply #13 on:** April 05, 2007, 12:04:49 am »

Some more work on the mainhull and sternpart

Gantu

Mike_K · « **Reply #14 on:** April 05, 2007, 03:40:50 am »

Gantu-- Very nice! Really excellent workmanship.

Mike

DickyD · « **Reply #15 on:** April 05, 2007, 08:03:44 am »

Excellent work Gantu.

Very impressive photography to.

Richard

gantu · « **Reply #16 on:** April 05, 2007, 08:45:05 am »

Thank you this is my first RC sub i build so i keep going on.

Gantu

Martin (Admin) · « **Reply #17 on:** April 05, 2007, 09:06:14 am »

Hi Gantu,
I seemed to have missed a post somewhere.... is this a kit, plans or a scratch build?

Martin.

DickyD · « **Reply #18 on:** April 05, 2007, 09:49:06 am »

Quote from: Mayhem - Forum Admin on April 05, 2007, 09:06:14 am

Hi Gantu,
I seemed to have missed a post somewhere.... is this a kit, plans or a scratch build?

Martin.

Hi Martin
If you go to the begining of the thread I would think it is scratch built. Sounds like someone Gantu knows ran up the frames for him. He's obviously done the brasswork himself.
Very impressive all round I think.
Take note of the photos

Richard

ajg141 · « **Reply #19 on:** April 05, 2007, 10:25:07 am »

Very nice work Gantu. You've managed to squeeze all those linkages into the stern very neatly. Much better than some of my efforts.

Andrew

gantu · « **Reply #20 on:** April 05, 2007, 12:14:06 pm »

Hi sorry i got only the hull and deck thats it the rest i did on my own. Of cause the cnc milled parts help a lot also.

Gantu

News:

Author Topic: Build midget japanese submarine type Koryu (Read 11179 times)

Mike_K