Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[Pete C]

Well Just bought 2 of these from Sarik hobbies, so will see how the build goes, ots of styrene work ....
any build advice and pointers welcome

[RST]

Interested how you get on. There's build info and pics back to the original article on Google. 2 were pictured by someone here on the new carrier sea trials entering harbour.


I have a hull but made a bad start so far. Also I thought I bought 555 motors but think they might be the rubbish 550's in the end. Unfortunately for the original designer, pics of the plans are on-line enough to make a start and check allot of crude dimensions. Personally I think the hull is out at the transom. Think my moulding is "v" shaped when it should be curved across the beam?  I have a feeling the beam is out a bit also, but that could be usual "spring back" after vac moulding.


Not sure if that helps,


Rich

[Martin (Admin)]

Website: https://www.sarikhobbies.com/product/pilot-40-pack-hulmm1444/

[Pete C]

Yes I think the vacformed hull is off a bit and also it looks the master has had a repair done and not faired up very well, so we'll see how it goes.
Im installing a couple of brushless motors in 1000kk I think.
I have the shafts made now and the rudders are ready, will need a good think about the keel as with the plug bing out a bit I'll have to play most of it by eye.
willl post pictures once I have the keel in and propshafts.
My son now has the second hull and I think he is useing it to freelance a model pilot he likes so I dont think the errors will be too bad for him to deal with.

[Cadser]

I would be interested on how you got on as I have just bought a hull


Brian