Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: The MAP submersible, aka the 'Jelly Bean'  (Read 2482 times)

Patrick Henry

  • Guest
The MAP submersible, aka the 'Jelly Bean'
« on: March 09, 2012, 09:19:58 am »

This is based upon the styrene hull/deck set from MyHobby Store (http://www.myhobbystore.co.uk/product/16988/submersible--plan-bm1426) and nicknamed the 'Jelly Bean' by AMS Chairman Nigel Edmonds...

Mine has a Prestwich Models r/c box, 2 x 7.2v, 1600ma/h cell packs, a Thunder Tiger esc, Robbe rx, a 385 motor turning a 35mm 3 blade brass prop in a nozzle and a 360 motor driving a 30mm 3 blade brass prop for the vertical thruster.

She has two forwards facing HiViz UltraBrite leds in the nose, one underneath, one on the vertical tail fin and two flashing HiViz Ultrabrite leds on the upper deck, these run from a 5 x 1200ma/h cell pack in the free flood area in the bows.

She's just off to be sprayed up properly...yellow and black vertical stripes.


Rich







Logged

Patrick Henry

  • Guest
Re: The MAP submersible, aka the 'Jelly Bean'
« Reply #1 on: March 09, 2012, 02:13:04 pm »

This is a very short piece of video of the initial test of the vertical thruster. Apologies for the shakey video, I was trying to hold the camera, press the start button and hold the leads on to the battery, all at the same time.


http://www.youtube.com/watch?v=o85VtCRGJrs&feature=player_embedded
Logged

bassplayer1

  • Guest
Re: The MAP submersible, aka the 'Jelly Bean'
« Reply #2 on: March 09, 2012, 06:44:52 pm »

Nice job Rich!!! :-)) Any pictures of the inside?
Logged

Patrick Henry

  • Guest
Re: The MAP submersible, aka the 'Jelly Bean'
« Reply #3 on: March 09, 2012, 07:03:48 pm »

Internal pics coming right up, Yannis...


     
Logged

bassplayer1

  • Guest
Re: The MAP submersible, aka the 'Jelly Bean'
« Reply #4 on: March 10, 2012, 12:37:38 am »

Fantastic!!! Nice little fellow!!! Thank you Rich!!!
Logged

Patrick Henry

  • Guest
Re: The MAP submersible, aka the 'Jelly Bean'
« Reply #5 on: March 10, 2012, 08:08:40 am »

Thanks Yannis, most gracious of you to say so. Just the controller for the vertical thruster motor to install (I forgot about it....call it a senior moment!) and THEN she'll be off to the spray shop.


Rich
Logged

redboat219

  • Guest
Re: The MAP submersible, aka the 'Jelly Bean'
« Reply #6 on: March 10, 2012, 12:38:11 pm »

Kinda reminds me of the Darkstar UAV.
Logged

Subculture

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 4,187
  • Location: North London
    • Dive-in to Model submarines
Re: The MAP submersible, aka the 'Jelly Bean'
« Reply #7 on: April 10, 2012, 05:32:47 pm »

So what happened with the test dive of this, or did a seagull fly off with it in its beak?
Logged
Pages: [1]   Go Up
 

Page created in 0.246 seconds with 22 queries.