Topic: Dive-in at Lido. First Brockwell Dive-in of the year 27th March 2011 (Read 11767 times)

Subculture · « **on:** March 28, 2011, 05:03:00 pm »

This was a splendid day, with fantastic weather. I was little concerned when I first got up as early on in the morning, things were looking decidedly grey, and it was quite chilly. However the sun soon got his hat on, and by about 11 'o'clock most of us were down to our short sleeves.

We had about thirteen attend on the day and about seventeen boats present with a steady stream of spectators throughout the day. Now looking forward to the Summer Dive-in, which is held at St Albans in Hertfordshire. This is weekend long event, with 6 hour sailing slots each day. The pool is a bit smaller than Brockwell, but at 100ftx60ft and a 9ft deep end is still more than big enough to accommodate large boats.

The following photographs were taken by Roy Palmer and were shot towards the end of the day. Other photos and video should follow, and will hopefully be added to this thread. No film or pictures from me I'm afraid- I was kept a little busy to take any pictures this time around.

Andy

Mankster · « **Reply #1 on:** March 28, 2011, 06:45:46 pm »

Opps missed this thread and posted on the old one.
Somemore pictures here...

Brave....

silent running556 · « **Reply #2 on:** March 28, 2011, 07:38:11 pm »

Glad the weather stayed alright in the end.

Mankster · « **Reply #3 on:** March 28, 2011, 07:46:40 pm »

Yes weather was perfect. Trevor and Roy brought thier U47's. I'll postsome pics of them once I have uploaded them.

silent running556 · « **Reply #4 on:** March 28, 2011, 08:25:52 pm »

Nice one. I'll try for the June events in St Albans.Mine will be the one that resembles Del boy's van.

Subculture · « **Reply #5 on:** March 28, 2011, 08:43:34 pm »

Jolly good. Del-boys van? That will please the fiancé of one of the (potential) attendees.

Andy

trevor v · « **Reply #6 on:** March 28, 2011, 09:17:00 pm »

Yes it was a very good day

I enjoyed it even with a battery problem (a dead cell in one of the packs.) A good day was had by all, i will definitely be at St albans

Mankster · « **Reply #7 on:** March 29, 2011, 10:52:32 am »

Here are the U47's. Roy's is pretty much standard and Trevor's is fitted with a 825ml pistonn tank.

silent running556 · « **Reply #8 on:** March 29, 2011, 06:34:48 pm »

Nice pictures, you haven't got a close up of the motor wiring/capasitors have you? I had to look for replacements as i only have one set. I got a couple in Maplins (Stevenage).
I've had drill problems too so still waiting to put the mess, whoops sorry i meant finely cut sections together.

Subculture · « **Reply #9 on:** March 29, 2011, 07:13:45 pm »

Have a look at this link- http://www.kronosrobotics.com/an142/GAN142.shtml

trevor v · « **Reply #10 on:** March 29, 2011, 09:26:00 pm »

pic of capasitors

Davy1 · « **Reply #11 on:** March 30, 2011, 10:44:26 am »

Could I just say that is a very useful reference that Andy has found on interference.

David

silent running556 · « **Reply #12 on:** March 31, 2011, 12:45:54 am »

Thanks everyone, I've been fiddling with the brass bits at the front of the boat today, cutting bits off with a hack saw. My soldering iron likes to stink alot but has a phobia to solder.

Decided to attack the body work again to relieve the frustration.

Davy1 · « **Reply #13 on:** March 31, 2011, 12:20:46 pm »

Clean the brass well. Plenty of heat - good big soldering iron (50 watts) and use some extra flux - Fluxite does the job for me!

Subculture · « **Reply #14 on:** March 31, 2011, 04:54:35 pm »

You may need to clean the soldering iron tip too- probably oxidised, or might have burnt out, they do after quite a bit of use.

silent running556 · « **Reply #15 on:** March 31, 2011, 05:46:05 pm »

It's brand new but only 30w and £4.99. Looks like i might be needing more oomph. I'm slightly puzzled as to exactly what i'm supposed to do with the bits here anyway. At least i know the black wire's live and the red's earth eh.

Mankster · « **Reply #16 on:** March 31, 2011, 07:08:14 pm »

One end of the soldering iron soon get too hot to hold... Thats all you need to get right, and everything else will be downhill from there

bijou · « **Reply #17 on:** March 31, 2011, 08:04:15 pm »

SUPER Pictures.I am jealous of Yours gays!.We don't have a submarine Club.

bassplayer1 · « **Reply #18 on:** March 31, 2011, 09:09:50 pm »

Fantastic!!! I wish I was there!!!

Mankster · « **Reply #19 on:** April 01, 2011, 10:44:21 am »

More pictures....

Subculture · « **Reply #20 on:** April 01, 2011, 10:55:58 am »

I wish you were there too!

We aren't a club. These events are open to anyone to come along. We get people from various organisations, and some who just prefer to remain independent.

We have a weekend Dive-in in June. I've never seen a weekend long model submarine event take place in the UK, so it's a shot in the dark. If it's successful, it will become an annual event.

Andy

Davy1 · « **Reply #21 on:** April 01, 2011, 11:32:34 am »

Andy is giving a rather one-sided description of the events which he and Ramesh run as private individuals.

There are many submarine events in the UK which have been run for many years including for example Merstham (Coming soon) This is weekend event and is a proper show with a swimming pool and it is run for Charity.

More details of all these events on:

http://associationofmodelsubmariners.com/forthcoming-events.php

Mankster · « **Reply #22 on:** April 01, 2011, 11:43:18 am »

More pictures...

Subculture · « **Reply #23 on:** April 01, 2011, 12:06:18 pm »

Events like the Merstham show are very nice, and I've attended in the past. It's worth pointing out that access to the pool is restricted to 'slots' of about half an hour (30 minutes) at a time and you tend to get about three or four slots in a day to sail. So that gives you about and hour or two of sailing time each day. For some that is enough.

At the Dive-ins, providing there are no clash in frequencies, you can sail for a full six hours for each day which usually exhausts the endurance of the operator before the boat.

The pool sizes are also considerably larger, which better suits the bigger boats like the Typhoons etc.

AL 1 · « **Reply #24 on:** April 01, 2011, 03:07:12 pm »

Quote from: bijou on March 31, 2011, 08:04:15 pm

SUPER Pictures.I am jealous of Yours gays!.We don't have a submarine Club.

the gays were not there they will be at mertsham

News:

Author Topic: Dive-in at Lido. First Brockwell Dive-in of the year 27th March 2011 (Read 11767 times)

silent running556

silent running556

trevor v

silent running556

trevor v

Davy1

silent running556

Davy1

silent running556

bijou

bassplayer1

Davy1