Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[boat captain]

Hi

What size and make of bow thruster has anybody used on this model, and how do they perform.

[nemesis]

With independent twin screws you may find a bow thruster academic, you can put these vessels anywhere. In my opinion a thruster is not worth the bother, been there and got the T shirt. Nemesis

[gerard]

Hi Boat Captain,
 When I built my 1/16 Speedline Severn I used a Raboesch 22/25 bow thruster. Haven't got independent motor control ,find this works well for me.
Got mine from Cornwall Model Boats about £ 36 .
Hope this helps.
Gerard

[timbo]

Hi Gerard

Off a the mark a bit but when I purchased my 1/16 severn i was told the rudders will need altering, did you have to do the same and if so how and to what size.

Tim

[gerard]

Hi Tim, with regard to your rudder question, yes I had to increase the size of mine, using the ones supplied I found it didn't react to rudder control very well, bought two larger ones from Cornwall model boats part no RMA 3064 medium rudder 55x36 @ £4.49 each, then bulked them up with car body filler, now turns very well. Hope this helps , if I can be of any other help just ask.
Regards Gerard

[boat captain]

Hi Tim

Mine are the ones supplied they are 55X40 built up with plasticard and body filler. 

I am only just starting this build so don't know how she will handle yet,

[gerard]

Hi Boat Captain, These look to be the size that I had to increase mine yo , gerard